Lightly sand smooth after the putty has dried. If you want to be able to remove the panels later, skip the adhesive and use only finish nails.įill nail holes and seams with wood putty. For a permanent hold, use construction glue and then secure with finish nails. (I used an extra outlet box to trace around for lines that were easier to see.)ĭrill holes in the corner of the outlined shape. When removed you should see the lipstick impressions. To cut the hole, smear lipstick around the edges of the box (or you can smear it on an outlet as shown in this post.) Hold the masonite panel in place and push against the outlet box. If you have an outlet or light switch, you need to cut a hole in the masonite to accommodate them. (Note: The skinny little section on the left side of the door was left blank, no one has noticed after it was painted black.) Plan to hang a small piece for over any doors. Use one large sheet to cover as much wall as possible. Dry fit the panels on the wall and make any adjustments as necessary. Use a jigsaw, circular saw, table saw, or other power saw to cut each panel. (Or bring your measurements and ask the store to cut it to size for you.) Optional (if you have an outlet or switch to work around):Ĭut your masonite to size.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |